Call us: 08045803029
Technical Specifications:
Input Voltage Range | 140 - 280 V AC |
Input Frequency | 47 -53 Hz |
DC Voltage | 12 V / 24 V / 36 V/ 48 V/ 72 V DC |
Output Voltage | 200 - 240 VAC |
Output Frequency | ± 0.5 Hz |
Display | Full Digital display to show every state of Inverter. |
Wave Form | PWM-Quasi Square Wave |
Battery Type | Lead Acid / Tubular |
Load power Factor | 0.8 |
Indication | Mains Normal, Mains High, Mains failure, Load on Mains / |
battery,Battery Charging, Battery Low, Inverter Overload. | |
Protections | Under / Over Voltage, Overload, Low Battery & Short circuit |
Alarms | Low battery, Overload, |
Rating Available | 2000 VA 5500 VA |
S. No. | Condition | LCD Display Indication | Details / Narration |
1 | Load on Mains Input Voltage | Inverter On Mains Battery Charging | Indicates that the Mains voltage is available to inverter & the Inverter is charging the batteries. |
2 | Load on Mains Input Voltage | Inverter On Mains Battery Volts | Indicates that the Mains voltage is available to Inverter & it will display the battery Volts to ascertain the charging status of batteries. |
3 | Load on Battery (Mains Off) | Inverter On Battery Discharging | Indicates that the Mains voltage is not available to inverter & the Inverter is on battery Mode. |
4 | At Full Load | Inverter On Battery Discharging | Indicates that the load on inverter is as per inverter capacity. |
5 | At Appx. 10 % Overload | Overload Reduce Load | Indicates that the load is more than the Inverter capacity, so load should be reduced. It will give beep sound until the load is reduced. |
6 | On Reducing Load to inverter capacity | Inverter On Battery Discharging | When the load is reduced from the above condition then the Inverter returns to Normal Mode & stop giving beep sound. |
7 | Battery Low | Battery Very Low Please switch off | Indicates that the batteries are fully discharged so Inverter should be switched Off in this condition. |